性能曲线
日机装屏蔽泵输送介质的主要业绩
| 酸类 | 硫酸，硝酸，混合酸，磷酸，氢氰酸，铬酸，醋酸，乙二酸，乳酸，甲基丙烯酸， 氯磺酸，脂肪酸，硼酸 |
| 盐类 | 氯化钙，氯化钠，碳酸钠，硫酸铵，硫化硫酸钠，氰化钠，重铬酸钾，氯化锂， 亚硫酸铵，次氯酸钠，氯酸钠，溴化锂 |
| 碱类 | 苛性钠，苛性钾，氨水 |
| 酯 | 醋酸甲酯，醋酸乙酯，醋酸戊酯，甲基丙烯酸甲酯 |
| 芳烃类 | 苯，甲苯，二甲苯，苯酚，萘，二氯代苯，甲酚，甲基萘，烷基苯 |
| 碳氢化合物 | 丁烷，己烷，丙烷，乙烯，丙烯，环己烷 |
| 醇类 | 甲醇，乙醇，丁醇，异丙醇，辛醇，甘油，乙二醇，丙二醇 |
| 氧基化合物及醚类 | 甲醛，乙醛，苯甲醛，甲醚，乙醚，丙酮 |
| 卤化物 | 液氯，四氯化碳，三氯乙烯，氯丙烯，无水氟化氢，二氯甲烷，氯甲烷，四氯化钛， 四氯化硅，三氯氧化磷，三氯化磷，二氯乙烯，二氯丙烯，氯仿，三氯甲硅烷，氯化铝 |
| 氮硫化合物 | 二硫化碳，无水二氧化硫，肼，苯胺，丙烯酸铵，乙胺 |
| 冷冻剂 | 氟利昂，干冰，液态甲烷，液氨 |
| 油类 | 石油衍生产品，变压器油，食用油，润滑油 |
| 热媒和冷媒 | 道氏热载体和其他热媒，溴化锂，氯甲烷和其他冷媒 |
| 水 | 纯水。热水，海水，废水和其他类水 |
| 单体和化合物 | 聚氯乙烯，聚乙烯醇，苯乙烯，己内酰胺，丁二烯，乙烯醚，氯丁橡胶，乙腈 |
| 其他 | 水银，四乙基铅，三乙基烷，硅烷，过氧化氢，可塑剂，显像液明胶，清洁剂，糖液 |
| Acids | Sulphuric acid,Nitric acid,Mixed acid,Phosphoric acid,Hydrocyanic acid,Chromic acid,Acetic acid, Oxalic acid,Lactic acid,Methacry~c acid,Cblomsulfomc acid,Fatty acid,Boric acid |
| Salts | Calcium chloride,Sodium chloride,Sodium carbonate,Ammonium sulfate,Hypo,Sodium Cyanide, Potassium bickromata,Lithium chloride,Ammonium sulphite,Sodium hypochlorita,Sodium chlorate, Lithium bromide > |
| Alkalis | Caustic soda Caustic potash Ammoia water |
| Esters | Methyl aeetata,Ethyl acetate,Amyl,acetate,Methyl mcthacrylate |
| Axomatic Compounds | Benzene,Toluene,Xylean,Phenol,Naphthalene,Dichlorobenzean,Cresol, M~thyl naphthalene, Alkylbenzene |
| Hythocarbons | Butane,Henene,Propane,Propylene,Ethylene,cyclohexane |
| Alcohols | Methanol,Ethanol,Butanol,Isopropyl alcohol,Octyl alcohol,Glycerine,Glycol,Propylene glycol |
| Oxo-Compounds and Etheas | Formaldehyde,aldehyde,Benzaldehyde,Methyl ethers,ethyl ether,Acetone |
| Halogenides | Carbon,telracldoride,Trichl~thylene,Allyl chloride,Phosgene,Mqmd chloride，Anhydrous hydrogen fluoride,Methylene chloride，M~thyl chloride,Titanium tetrachloride,Silicon tetrachloride,Phosphcens oxychloridc,Phosphorus trichloride, Ethylene dichloride(EDC),Propylene dichloride, Tetrachloroethylene,Chloroform,Smcochloroform,Aluminum chloride
|
| Nitrogen and Sulfur Compounds | Carbon disulfide,Anhydrous ssulfur dioxide,Hydrazine,Anthne,Acrylamide,Ethylamine |
| Cryogenic Liquids | Freon,Liquid carbon dioxide,Liquid methane,Liquid ammonia |
| Oils | Petroleum related products,Transformer oil ,Edibleoil,Lubricants |
| Heat and Cool Medium | Dowthenn,Mobiltherm and other beat transfer media,Lithium bromide,Methyl chloride and other coolants |
| Watar | Distillate pure water,Hot water,Sea water,and other types of water |
| Monomers and compound | PVC,PVA,Styrene,Caprolactam,Butadiene,Wmyl ether,Neoprene,Acetonitrile |
| Other | Mercury,Tetraethyl lead,Triethyl,aluminum silaue,Methyl silane,Hydrogenperoxide,Plasficizars, Developers,Gehtine,Detergents,Syrups,Paints |
型号表示/规格范围
H N 21A - A1 C A C - 01 D1 X X
（1） （2） （3）- （4） （5） （6） （7）- （8） （9） （10） （11）
| 编号 | 分类 | 内容 | ||||||||||||
| （1） | 形式 | H-横行，L-管线性，B-电机在上立型， T-泵体在上立型，D-自吸横型，S-液中型 |
||||||||||||
| （2） | 结构 | N-普通型，V-高粘度型， T-高温型（带隔热盘）， S-泥浆分离型（带密封杯）， M-泥浆分离型（带机械密封）， G-泥浆分离型（带气体密封），Q-反向环流性， R-反向环流型（带连接器），B-高熔点型， C-简易高熔点型，W-普通外循环型， X-超耐热型（最高温度max。350℃（662°F）） |
||||||||||||
| （3） | 泵的编号 | 21A/B/C,22A/B/C/D/E,23A/B/C/D/E/F/G,24A/B/C/D/E/F, 25B/C/D/E/F,26C/D/E/F,27E/F,46A/B, 47B/C/D,48C/D/E,49C,X12/22/32/42 |
||||||||||||
| （4） | 电机规 格编号 |
A1-A3，B1-B3，C1-C4，D1-D3,F1-F4，G1-G3，H1-H2，J1-J4， K1-K4，A5，B5，C5，F5，G5 |
||||||||||||
| （5） | 电机绝缘 | H-H种绝缘,C-C种绝缘 | ||||||||||||
| （6） | 电机电 压编号 |
|
||||||||||||
| （7） | 电机防 爆等级 |
A-dⅡBT1,B-dⅡBT2,C-dⅡBT3,D-dⅡBT4, S-dⅡCT3,J-dⅡCT4,T-TE |
||||||||||||
| （8） | 最大容 许压力 |
01-1.0MPa(150psig)，02-2.0MPa(150psig)， |
||||||||||||
| （9） | 材质构 成编号 |
C1-SUS304/SCS13,C2-SUS304/SCS19, D1-SUS316/SCS14,D2-SUS316L/SCS16, E-CA20(Alloy20),G2-HastelloyC |
||||||||||||
| （10） | 夹套和热 交换器 （对电机） |
X-无，J-带可拆卸夹套，K-带可拆卸夹套，夹套和定子筒材质为SUS304，L-带焊接夹套，材质为钢，M-带焊接夹套，夹套和定子筒材质为SUS304，N-带焊接夹套，泵液冷却，材质同泵C-带热交换器，D-带热交换器，热交换器和定子筒材质为SUS304，E-外置的热交换器 | ||||||||||||
| （11） | 夹套和热 交换器 （泵壳和后轴承座） |
X-无，P-泵壳有焊接夹套，Q-泵壳有铸件夹套，R-泵壳有铸件夹套，后轴承座有焊接夹套，S-泵壳和后轴承座有焊接夹套 |
| NO | Categories | Content | |||||||||||||
| (1) | Model | H-Horizontal, L-In-line, B-Motor top T-Purnp top, D-Self-priming, S-Submerged |
|||||||||||||
| (2) | Construction | N-Basic, V-High viscous, T-High temperature with thermal isolation spacer, S-Slurry liquid with seal ring, M-Slurryo liquid with mechanical seal, G-Slurry liquid with gas seal, Q-Reverse circulation, R-Reverse circulation with adapter, B-high melting, C-high melting(simple type), W-Basic external circulation, X-No cooled high temperature, liquid temprtstutr, liquid temperature max350°C(662°F) |
|||||||||||||
| (3) | Pump model | 21A/B/C, 22A/B/C/D/E, 23A/B/C/D/E/F/G, 24A/B/C/D/E/F, 25B/C/D/E/F, 26C/D/E/F, 27E/F, 46A/B, 47B/C/D, 48C/D/E,49C, X12/22/32/42 | |||||||||||||
| (4) | Motor size | A1-A3, B1-B3, C1-C4, D1-D3, F1-F4, G1-G3, H1-H2, J1-J4,K1-K4,A5,B5,C5,F5,G5 | |||||||||||||
| (5) | Moror insulaton | H-H class, C-C class | |||||||||||||
| (6) | Power supply voltage |
|
|||||||||||||
| (7) | Explosion-proofcode | A-dIIBT1, B-dIIBT2, C-dIIBT4, S-dIICT3, J-dIICT4 T-TE | |||||||||||||
| (8) | Maximum allowable working pressure | 01-1.0MPa(150psig), 02-2.0MPa(300psig), 03-3.0MPa, 04-4.0MPa(600psig) |
|||||||||||||
| (9) | Materials code | C1-SUS304/SCS13, C2-SUS304/SCS19, D1-SUS316/SCS14, D2-SUS316L/SCS16, E-CA20(Alloy20), G2-HastelloyC | |||||||||||||
| (10) | Jacket and Heat Exchanger forMotor | X-Non,J-with mount type jacket, K-with mount type jacket, jacket and stator band material SUS304, L-welded typc jackct matcrial steel, M-welded type jacket, jacket,and stator band material SUS304 N-welded jacket cooling with pump un liquid, material same as pump, C-with heat exchanger, D-with heat exchangermhe, heat exchanger and stator band material SUS304, E-with separated heat cxchanger |
|||||||||||||
| (11) | Jacket and Heat Exhanger for Casing and Rear Bearing Housing | X-Non, P-with welded type jacket on casing, Q-with casing type jacket on casing, R-with casing type jacket on casing and welded type jacket on rear bearing bousing, S-with weded type jacket on casing and rear bearing bousing |
日机装牌屏蔽泵的选型范围
| 标准 | 次标准 | |
| 最大流量 Max．Capacity |
780m3/h(3,430gpm) | 1200m3/h(3430gpm) |
| 最大扬程 Max．Head |
300m(984ft) | 500m(1970ft) |
| 工作液温度 Flttid．Temp．Range |
-60 to 350℃(-76 to 662°F) | -200 to 450℃(-328 to 842°F) |
| 比重 SpealficGravityRange |
0.3 to 2.0 | Max.13.6 |
| 最大粘度 Max．viscosiW |
200mPas(200cP) | 500mPas(500cP) |
| 最大工作压力 Max．Working Pressure |
4MPa(600psig) | 80MPa(1200psig) |
| 按液部分材质 LiqmdEndMaterial |
SUS316,SUS316L,SUS3.4 | ·合金20 Alloy 20 ·镍合金C/B HastelloyC/B ·钛 Titamium ·钛·锆等 ZJreonhlmete ect． |
| 电机功率范围 MotorPowerRange |
0.4 to 132kw |
此标准设计需技术咨询
The standard design technology consulting